Kitchens, baths, and whole-home remodels done right the first time
Renovation contractor Murphy TX for homes that need real work
When you need a renovation contractor Murphy TX homeowners actually recommend, SpanForge Pro handles the demo, the framing, the trades, and the final walkthrough. We have served Collin County since 2022, pulling permits, passing inspections, and keeping your family's daily routine intact. Whether it is a 1990s kitchen with failing cabinets or a bathroom with water damage behind the tile, we scope the job, price it honestly, and finish it.
Live phone supportUpfront optionsBacked workmanship
What's included
What our renovation service covers
Every renovation starts with a written scope. Below is what we handle on a typical Murphy project. If your job needs something outside this list, we tell you before we bid, not after demo starts.
Demo and disposal
We remove old cabinets, tile, drywall, flooring, and fixtures, then haul everything to the dumpster the same day. Floors and doorways get protection before demo starts. You are not left with a pile of debris in the driveway for a week.
Structural and framing
If the layout changes, we reframe walls, add headers, and sister joists where needed. A structural engineer reviews any load-bearing change before we cut. We use lumber graded for the application and nail it with a framing nail gun, not a hammer.
Electrical and plumbing rough-in
Licensed electricians run new circuits, add outlets, and upgrade panels when the old one is maxed out. Plumbers replace supply lines and drain stacks. Both trades pass rough-in inspection before drywall goes up.
Drywall, paint, and texture
We hang, tape, and texture drywall to match the existing finish, then paint with Sherwin-Williams or Behr products. Ceilings, walls, and trim get two coats. We caulk every seam and fill every nail hole before the final coat.
Cabinets, countertops, and tile
Cabinet install, countertop templating, backsplash tile, and floor tile are all handled by our finish crew. We shim and level every cabinet run, and we set tile with a laser level so the grout lines stay straight across the room.
Final walkthrough and warranty
We walk the job with you room by room and fix anything on your punch list before final payment. You get a one-year workmanship warranty and a maintenance sheet with paint colors, grout brands, and filter sizes for the new fixtures.
Service overview
What a renovation contractor Murphy TX does for your property
A renovation contractor Murphy TX is a licensed general contractor that manages structural changes, systems upgrades, and finish work on an existing home. That means tearing out old drywall and tile, reframing where the layout changes, running new electrical and plumbing lines, and installing cabinets, countertops, and flooring. We coordinate every trade on one schedule so you are not chasing five different crews. One point of contact, one contract, one warranty on the workmanship.
Murphy homes built in the 1980s through the 2000s are hitting the age where original plumbing leaks, outdated electrical wiring, and poor insulation start showing up behind the walls. If you have been searching for a renovator Murphy TX near me and getting nothing but callbacks that never come, we answer the phone. We walk the property, photograph what we find, and give you a written scope before you commit to anything.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
How our renovation process works
The process flexes to the condition, but these checkpoints keep decisions clear.
Walkthrough and scope
We meet you at the property, measure every room, and inspect the attic, crawlspace, and panel. You get a written scope within 48 hours that lists materials, labor, and allowances. Most homeowners say this is the first time a contractor actually explained what they were paying for.
Permits and selections
We pull the permits and hand you a selections sheet for tile, paint, cabinets, and fixtures. You can pick from our supplier accounts at Home Depot or Lowe's, or use your own. We lock the material list before demo so nothing sits on a truck waiting for a decision.
Demo and rough-in
Demo takes one to three days for a kitchen or bath. We haul everything to the dumpster the same day. Then the rough trades move in: framing, electrical, plumbing, and HVAC. Rough-in inspection happens before any drywall goes up.
Drywall, paint, and finishes
After inspection, we hang and finish drywall, texture to match, and paint with Sherwin-Williams or Behr products. Then cabinets, countertops, tile, and fixtures go in. This phase is the longest, usually two to four weeks depending on the size of the job.
Final walkthrough and punch list
We walk the job with you room by room. You point out anything that is not right, and we fix it before we invoice the final draw. We also hand over a maintenance sheet with paint colors, grout brands, and filter sizes so you can keep the work looking new.
Tools & methods
Tools and methods we use on Murphy renovations
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
DeWalt and Milwaukee cordless drills
Used for cabinet install, fixture setting, and framing. We keep two batteries on every charger so the crew never waits for a tool to power up.
Makita circular saw
Cuts plywood, lumber, and subfloor panels. We use a track guide for straight cuts on countertop substrate and shelving.
Paslode framing nail gun
Drives framing nails for headers, blocking, and sistered joists. Faster and more consistent than hand-nailing, which matters when a wall has to come down and go back up in a day.
Bosch laser level
Sets cabinet runs, tile lines, and ceiling grid. A laser level is the difference between grout lines that stay straight across a 12-foot wall and grout lines that drift.
Stanley stud finder and tape measure
Locates framing behind drywall before we cut for outlets, medicine cabinets, or TV mounts. Prevents hitting a plumbing line or a wire inside the wall.
Concrete mixer
Mixes small batches for shower pan mortar beds, curb repairs, and slab patches. We mix on-site so the mortar is fresh when it hits the pan.
Use cases
When Murphy homeowners call a renovation contractor
These examples show how the service framework adapts rather than forcing every call through one repair.
Primary bath in Rolling Ridge
Cracked 4-inch tile, a shower pan that leaked into the ceiling below, visible mold growth along the curb, and a vanity that had swollen from a slow drain leak. The room had not been updated since the house was built. → Full gut to the studs, mold remediation, new framing at the curb, a waterproof membrane, 12x24 porcelain tile, a new shower pan, a frameless glass door, and a floating vanity. The rough-in inspection passed on the first visit. Total job time was 16 days.
Whole-home refresh in Stonebridge Ranch
A 2005 home with original carpet, builder-grade paint, two dated bathrooms, and a kitchen with a failing disposal and worn cabinet hardware. The family was moving in from out of state in nine weeks. → New luxury vinyl plank flooring throughout the main level, two renovated bathrooms, a kitchen refresh with new hardware, disposal, and paint, and fresh paint on every wall and ceiling. We delivered weekly photo updates and a video walkthrough. The job finished three days before the moving truck arrived.
Problems we solve
Renovation problems we solve for Murphy homeowners
Old homes hide problems behind the drywall. We open the wall, fix the cause, and rebuild it so the same issue does not come back in two years.
Water damage behind kitchen and bath tile
We open the wall, remove the wet drywall and insulation, treat any mold growth, and replace the rotted plywood or framing. Then we rebuild with a waterproof membrane behind the tile so the next leak stays in the drain pan.
Outdated electrical wiring that fails inspection
Our licensed electricians replace aluminum branch circuits with copper, upgrade the panel when needed, and add dedicated circuits for the range, microwave, and dishwasher. We schedule the rough-in inspection before drywall so there are no surprises.
Foundation cracks that show up after demo
We inspect the slab before demo and flag any crack wider than a credit card. If a structural repair is needed, we bring in a foundation specialist, complete the repair, and then continue the renovation on a stable base.
Poor insulation and drafty rooms after a remodel
We air-seal around new windows and doors, add insulation where the wall is open, and verify the attic baffles are not blocked. A renovated room should hold temperature like the rest of the house, not fight it.
Pricing process
What renovation work costs in Murphy
$12,000 - $85,000 depending on scope
Scope and square footage
A powder room costs less than a primary bath because there is no shower pan, membrane, or glass. Square footage drives material quantities, labor hours, and dumpster count. We measure every room before we bid.
Hidden damage behind the walls
Water damage, mold growth, and structural rot are the biggest variables. We price the visible scope first, then stop and show you photos if we open a wall and find something that changes the job.
Material grade
Stock cabinets and quartz at one price point, custom cabinetry and natural stone at another. Tile ranges from $2 to $25 per square foot. We list allowances in the scope so you control the upgrade decisions.
Questions before we arrive
Frequently asked questions about renovation contractors in Murphy
What does a renovation contractor do in Murphy TX?
A renovation contractor in Murphy TX manages the entire remodel: demo, framing, electrical, plumbing, drywall, paint, and finish carpentry. We pull the permits, schedule the inspections, and coordinate every trade on one timeline. You get one contract and one warranty instead of juggling five separate crews.
How much does a renovation contractor cost in Murphy?
Typical 2026 pricing in Murphy runs $45 to $90 per square foot for a mid-grade renovation, or $18,000 to $35,000 for a full kitchen and $12,000 to $25,000 for a bathroom. Structural changes, high-end tile, and custom cabinetry push those numbers up. We give you a line-item scope before any work starts.
How to hire a renovator in Murphy TX?
Check the Texas general contractor license, ask for a certificate of insurance, and get a written scope with allowances listed. Call two past clients from the last six months. If a contractor cannot produce those three things, keep looking. We hand all of it over on the first visit.
Do I need a renovation contractor for my Murphy property?
If the job touches electrical, plumbing, structural framing, or requires a permit, yes. Texas law and City of Murphy code require a licensed contractor for those scopes. Cosmetic work like paint and flooring can be DIY, but anything behind the drywall should go through a licensed renovation contractor.
Related services
Other services Murphy homeowners ask us for
general contractor near me
When your renovation grows into new construction or an addition, our general contractor near me service covers the structural and site work. Same crew, same schedule, one contract from foundation to final paint.
Residential general contractor
Most of our renovation work is residential. We handle single-family homes across Murphy, from 1,800-square-foot ranches in Rolling Ridge to 4,000-square-foot two-stories in Stonebridge Ranch.
Commercial general contractor
If you own a small office or retail space on the Murphy Road Corridor, we handle tenant improvements and commercial renovations with after-hours scheduling so your business stays open.Ready when you are
Get a renovation contractor Murphy TX estimate this week
Call SpanForge Pro at (855) 948-0345 and we will schedule a walkthrough within five business days. You get a written scope in 48 hours, a fixed schedule, and a crew that shows up when we say we will. Licensed, insured, and local to Collin County.
Talk with the local team
Request renovation contractor
Call (855) 948-0345 or email info@spanforgepro.com and we will get back to you the same business day. We schedule walkthroughs Monday through Friday and answer emergency calls 24/7 for storm and water damage. Tell us what you are planning and we will tell you what it takes to get it done.